To Xpeditionr Translator User Guide Exclusive [work]: Altiumr
exclusive, comprehensive feature guide
This document is an designed to serve as the definitive user manual for engineers and designers transitioning from Altium Designer to Siemens Xpedition Enterprise.
- Generate updated BOM (Xpedition): include XLib part IDs, MPN, manufacturer, footprint, and custom fields.
- Fabrication outputs: Gerbers, ODB++, IPC-2581 (from Xpedition) — use these for manufacturing.
- Assembly outputs: Pick-and-place (CSV), centroid files, assembly drawings, and 3D STEP as required.
- Test artifacts: Netlist test reports, ICT/JTAG boundary lists, and DFT/DFM reports.
- DRC/ERC reports: Save and archive for review.
Preparation
: Consolidate all source Altium files, including .PcbDoc (layout), .SchDoc (schematics), and any relevant library files. altiumr to xpeditionr translator user guide exclusive
Altium to Xpedition Translator User Guide is the primary technical resource for engineers migrating designs from Altium Designer to Siemens Xpedition Enterprise. This documentation is typically hosted on the Siemens Support Center (formerly SupportNet). SIEMENS Community Core Translation Process exclusive, comprehensive feature guide This document is an
- Pad Stack Definitions: Altium and Xpedition define pad shapes and layer clearances differently. Round, rectangular, and oblong shapes usually translate well, but complex custom shapes often require manual redrawing.
- Net Classes and Rules: Design rules (trace width, clearance, differential pairs) rarely translate perfectly. The guide usually recommends re-entering Constraint Manager rules manually in Xpedition.
- Text and Fonts: Font rendering engines differ; schematic annotations and silkscreen text often shift or change size, requiring manual tidy-up.
- Holes and Vias: Definitions of plated vs. non-plated holes and via tenting can be misinterpreted during translation.
“Xpedition Library and Design Migration User Guide for Altium Designer”
For the exact workflow, refer to the Siemens Support Center document: – Section 4.3 (“Parameter Mapping”) and Section 5.2 (“Conditional Cell Assignment”). Generate updated BOM (Xpedition): include XLib part IDs,