Chiron Firmware 1.3.5 Download !new!: Anycubic

Technical Brief: Anycubic Chiron Firmware v1.3.5 Implementation 1. Overview Anycubic Chiron Go to product viewer dialog for this item.

Hardware Requirements

The Anycubic Chiron Firmware 1.3.5 is the official factory-stable release designed to provide a plug-and-play experience while ensuring the machine's safety features—like thermal runaway protection—are active. Where to Download Anycubic Chiron Firmware 1.3.5 Anycubic Chiron Firmware 1.3.5 Download

1. Download the firmware file.
2. Extract the file using decompression software (WinRAR, 7-Zip).
3. Rename the file to firmware.bin if it is not already named so (ensure file extensions are visible in your operating system to avoid naming it firmware.bin.bin).
4. Copy the firmware.bin file to the root directory of the MicroSD card. Do not place it inside a folder.

Installing the Anycubic Chiron Firmware 1.3.5 download is just the first step. You now need to recalibrate your machine. The new firmware uses different EEPROM addresses, so old settings are invalid. Technical Brief: Anycubic Chiron Firmware v1

Why Update to Firmware 1.3.5?

• On the touchscreen, go to Settings > About Machine.
• If you see a version lower than 1.3.5 (e.g., 1.3.0, 1.3.2, or 1.3.4), you should update.

Anycubic’s Official Support Center

Go to support.anycubic.com , search “Chiron firmware,” and look for archived versions. As of 2025, 1.3.5 may be listed under “Legacy Firmware.” Download the firmware file

Please note that direct download links may vary depending on the region and availability. Always ensure that you download the firmware from a trusted source to avoid any potential risks.