The is an Autonomous (Standalone) Cisco IOS software image designed for the Cisco Aironet 3500 Series. Unlike lightweight images (k9w8), which require a Wireless LAN Controller (WLC) to function, this "k9w7" image allows the access point to operate as a self-contained unit with its own management interface and configuration. Version: 15.3(3)JF15
have noted that the 3500 series might no longer be visible in the standard search; you may need to look for newer AP models (like the 3600 or 2700) to find compatible legacy downloads or contact support. Cisco Community Deployment Write-Up To install or convert your AP using this file, follow these standard procedures: 1. Method: CLI (via TFTP/FTP) If the AP is already running and you have console access: Set up a TFTP server (like ) on your PC and place the file in the root directory. Ap3g1-k9w7-tar.153-3.jf15.tar Download -
: Once you locate a download link, check if the site provides MD5 or SHA1 checksums. These are used to verify the integrity of the downloaded file. Cisco AP3G1-K9W7-TAR
archive download-sw /overwrite /reload tftp:// /ap3g1-k9w7-tar.153-3.JF15.tar Ensure your computer is in the same IP
: Ensure you have a TFTP server like Tftpd64 running on your computer and that UDP port 69 is open in your firewall. Compatibility & Limitations Hardware : This specific image is for hardware. Installing it on AP3G2 hardware (like the or 3700 series) will result in a boot failure.
Ensure your computer is in the same IP subnet as the Access Point. 3. Installation Methods There are two primary ways to apply this firmware: Method A: Via Command Line Interface (CLI) Connect via Console or SSH and use the following command:
Thus, the full file name tells you: Cisco Aironet AP3G1 family, strong crypto, autonomous-capable image, TAR archive, IOS version 15.3(3)JF15.