Asmedia Asm1083 Serial Port Driver Windows 10 May 2026

Comprehensive Guide: ASMedia ASM1083 Serial Port Driver on Windows 10

ASMedia ASM1083

The can be made to work on Windows 10, but it requires patience and the right driver. The key is to identify the actual serial controller chip behind the ASM1083 bridge. Once you locate a Windows 10 driver for that UART (often MosChip or Oxford), the serial ports will function correctly.

Plug and Play:

The chip should be recognized automatically as a "Standard PCI-to-PCI Bridge" in Device Manager. asmedia asm1083 serial port driver windows 10

• Use a terminal program (PuTTY, Tera Term, RealTerm) to open the COM port and test basic send/receive.
• Loopback test: Short TX and RX on the port, send data in the terminal; if you receive it back, basic UART is operational.
• Use a serial protocol logger or oscilloscope if timing or signal integrity problems persist.

For Windows 10 64-bit, Microsoft actually hosts a compatible driver on their Update Catalog. This driver is signed and will not break with Windows updates. Comprehensive Guide: ASMedia ASM1083 Serial Port Driver on

The "Real" Driver:

If you are trying to get a Serial Port to work, you likely need the driver for the I/O Controller chip on the expansion card (e.g., MosChip, NetMos, or Oxford), not the ASMedia bridge itself. 📂 How to Install and Update Use a terminal program (PuTTY, Tera Term, RealTerm)

If Device Manager shows a yellow exclamation mark for "PCI Serial Port," follow these steps to find the correct driver for the actual serial card:

Issue 4: Driver Signature Enforcement Blocks Installation (Error 52)

Overview