The firmware updates significantly enhance its value by transforming it from a simple multi-effects pedal into a more capable USB Audio Interface . While the hardware is praised for being a budget-friendly powerhouse with a built-in IR loader and battery power, the firmware process is often cited as essential but occasionally finicky. Key Improvements from Recent Updates
Multitrack Recording
: It allowed for true multitrack recording on Android phones using an OTG cable, effectively turning the pedal into a mobile USB audio interface. The Hardware Plot Twist cube baby firmware update
The Cable: It typically uses the Twin-Pin (K1) programming cable. This is the same cable used for many Baofeng and Retevis radios (UV-5R, RT22, etc.).
The Driver: If you are using a Windows PC, you will likely need to install the Prolific PL2303 Driver. Without this driver, the computer will not recognize the radio when plugged in.
M-Vave (formerly Cuvave) Cube Baby is a compact multi-effects pedal that has gained a following for its high value-to-cost ratio, primarily due to its ability to load third-party Impulse Responses (IRs) and its use as a USB audio interface. Updating its firmware is a critical process for users looking to unlock new features—like USB Loop Back The Cable: It typically uses the Twin-Pin (K1)
Format a microSD card (FAT32), size 8–32 GB recommended.
Copy firmware file named cube_firmware_v2.4.0.bin to the root directory.
Power off the device. Insert microSD.
Hold the reset button while powering on; continue holding for 8–10 seconds until LED flashes amber.
Release reset button; device will read the microSD and start the update process (LED will blink blue).
Wait ~10 minutes. Device will reboot when finished.
Remove microSD and verify firmware version in the app.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.