Ivoclar Programat P90 Manual Fixed May 2026
Ivoclar Programat P90 is a classic dental ceramic furnace known for introducing the membrane-sealed keypad to the market. Operating instructions for this model focus on program selection, parameter adjustment, and routine maintenance of the firing chamber. MedicalExpo Core Operating Instructions
Issue 4: Error Codes (e.g., "Temp Deviation")
: Press once to halt a running program or furnace movement; press twice to stop the vacuum. Open/Close Keys ivoclar programat p90 manual fixed
Control Unit Attachment:
Ensure the control unit is pushed into the furnace base until the locking bolts engage with an audible click. Ivoclar Programat P90 is a classic dental ceramic
Fix (Manual Reset):
- Turn the furnace Off (using the rear rocker switch).
- Press and hold Program 'P' button and the Down Arrow simultaneously.
- While holding, turn the Main Power Switch on.
- Release the buttons when "SERVICE" appears on the display.
Error 1: Furnace Stuck at "Heat Up" – Temperature Not Rising
Valid for firmware version 2.0 and higher
Document No.: 574731_rev_B
Vacuum Seal:
Regularly clean the sealing ring in the furnace head and the rim on the base to ensure they remain undamaged and free of debris. Important Safety Warnings Turn the furnace Off (using the rear rocker switch)
