Jl381a Firmware

HPE OfficeConnect 1920S 24G 2SFP (JL381A) switch Go to product viewer dialog for this item.

The runs on the PD.02 firmware branch.

Step 5 – Post-update check

My advice for JL381A:

Stick with the 16.11 release train for production. It is the "Gold Standard" for the 2930F chassis. jl381a firmware

Step 2:

Access the JL381A web GUI (default IP may be 192.168.1.1 or as set by your DHCP server). HPE OfficeConnect 1920S 24G 2SFP (JL381A) switch Go

However, this method only works if the existing bootloader is intact. A fully bricked device (corrupt vector table) will need the SPI programmer. Since the firmware lives on an external SPI

Since the firmware lives on an external SPI flash, you can program it directly using a CH341A, FT2232H, or Raspberry Pi GPIO.

Have a horror story or tip about updating 2930F switches? Drop it in the comments below.