Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Work |best| -
Life Probo PR70 — Installation, Use & Maintenance Manual (10 pages — concise summary layout)
Open the Hatch:
Loosen the clamping screws (2) and remove the operator cap (3) from the base.
8.3 Cleaning
Mounting:
Insert the protruding shaft of the operator (8) into the block's hole (9) on the runner without forcing it. Life Probo PR70 — Installation, Use & Maintenance
- Press [START] to begin cycle.
- Use [▲] [▼] to adjust intensity/time.
- Press [STOP] to pause or cancel.
- Unit auto-shuts off after 1 hour of inactivity.
- Introduction
- Safety Precautions
- Installation Instructions
- Operating Instructions
- Maintenance Schedule
- Troubleshooting
- Replacement Parts
- Technical Specifications
- Warranty Information
- Conclusion
- Flush lines before connecting.
- Apply PTFE tape on threads.
- Open supply slowly to check for leaks.
: Always disconnect the power supply before performing any maintenance work Peiter Automatic Remote Battery Press [START] to begin cycle