Lovato 31 Rgam 12 User Manual ★ Ad-Free
Lovato 31 RGAM 12
The is a microprocessor-based automatic transfer unit designed for the comprehensive management of stand-by generating sets. It serves as a central controller that monitors both mains and generator supplies to ensure seamless power transitions during failures. Core Functionality & Operation Modes
Display:
Includes a 3-digit reading display for alarms, status messages, and electrical readings. 🚦 Operating Modes & Interface lovato 31 rgam 12 user manual
Step 4: Powering Up
Section E: Programming Menu Structure
- Manual reset (recommended): Set the selector to “MAN” or “H” (Hand) — operator must press the reset button after a trip.
- Automatic reset: Set to “AUTO” or “A” — relay will reset automatically after cooling down. Use only where automatic restart does not pose a hazard.
| Contact | State in Normal | State in Trip | |---------|----------------|----------------| | 95-96 (NC) | Closed | Open | | 97-98 (NO) | Open | Closed | Lovato 31 RGAM 12 The is a microprocessor-based
- Width: 45 mm (standard modular width)
- Height: ~77 mm
- Depth: ~80 mm (including terminals)
Pro Tip:
Always use a flyback diode on the starter and fuel solenoid relays to protect the internal circuitry of the RGAM 12 from voltage spikes. 4. Programming Parameters Manual reset (recommended): Set the selector to “MAN”