To configure an interface for MultiECUScan , use the following recommended port and interface settings to ensure stable communication with your vehicle's modules. MultiECUScan Software Settings Access these by clicking Settings (F9) on the main screen and navigating to the Interfaces Interface Type ELM 327 (v1.3 or newer)
Open Multiecuscan, go to (or press F9 ), and select the Interfaces tab: multiecuscan elm327 port settings 2021
If MultiECUScan still doesn't connect:
We will use as the operating system. The process is identical for MES 4.6, 4.7, and 4.8. To configure an interface for MultiECUScan , use
ELM327 v2.1 detected Latency: 1 ms CAN bus test: OK (500 kbps) ISO 15765-4: OK Baud rate 115200: OK To configure an interface for MultiECUScan