[updated] - Onkyo Ht-r695 Firmware Update
Onkyo HT-R695 Firmware Update: A Step-by-Step Guide
- Do not unplug power or press any buttons once the update starts.
- Do not switch input sources or play audio.
- Do not turn off the TV display – some updates show progress only on screen.
- If using USB, avoid USB 3.0 drives (they may draw too much power). Use USB 2.0, 4GB–8GB.
- Ethernet is strongly preferred over Wi-Fi to avoid packet loss.
- Disable “HDMI CEC” temporarily if network update hangs (some CEC devices interfere).
Disclaimer
: Firmware updates are performed at your own risk. Ensure stable power and follow steps exactly. This guide is for informational purposes; the author is not affiliated with Onkyo.
April 2026
Now, check Onkyo’s official support page (or a trusted AV forum) to see if a newer version exists. As of , the last stable release for the HT-R695 is generally Version 1081-1010-0000-0010 (or newer—always verify via your region’s Onkyo site). onkyo ht-r695 firmware update
Step-by-Step Instructions
Once finished, the receiver will restart itself. Then: Onkyo HT-R695 Firmware Update: A Step-by-Step Guide
After updating the firmware: