Onkyo Rc-799m Remote Manual 90%

To program your Onkyo RC-799M Go to product viewer dialog for this item.

: If the code is accepted, the REMOTE MODE button will flash twice. Test the Device : Point the remote at the device and press the button to verify it responds. onkyo rc-799m remote manual

If your specific version of the RC-799M supports multi-device control, follow these steps to link it to your TV or Cable/Sat box: To program your Onkyo RC-799M Go to product

Key Components of the Remote:

Q/Setup

Use the button to access advanced on-screen settings on your TV. Navigation Place the RC-799M and your other remote head-to-head

The manual doesn't tell you everything.

Good news: This remote does not use Bluetooth or RF. It uses IR. As long as your Onkyo receiver has a clear line of sight to the remote, it will work automatically. There is no "sync" button.

Onkyo RC-799M remote manual

The is more than just a button map—it is the key to unifying your home theater. By understanding how to program device codes, create macros, and perform resets, you transform a simple remote into a powerful control center.

1. Place the RC-799M and your other remote head-to-head (2–4 inches apart).
2. On RC-799M, press and hold the device button you want to assign (e.g., TV), then press Enter (the button lights).
3. Press the button on RC-799M you want to teach (e.g., Play).
4. Press and hold the corresponding button on the other remote until the RC-799M flashes twice.
5. Repeat for other buttons, then press Enter to exit.