Pacific Fitness Del Mar Home Gym Assembly Manual -

To assemble your Pacific Fitness Del Mar home gym, you will need to construct the main frame, install the weight stack, and route the cable system following a sequence that ensures structural stability Essential Tools

Based on Pacific Fitness gym standards, you will typically need the following tools: Two 3/4" and two 9/16" open-end wrenches. One rubber mallet (for end caps). One 3/16" hex key (often supplied). Snap ring pliers and Teflon/Silicone spray lubricant. pacific fitness del mar home gym assembly manual

3.2 Step-by-Step Assembly

• Attach the seat and backrest to the main frame using the 5mm Allen screws.
• Adjust the seat and backrest to the desired position.

Hand-tighten bolts initially. Only fully tighten the main base bolts once the vertical posts are aligned to ensure the frame is square. Main Post: To assemble your Pacific Fitness Del Mar home

Introduction