Pro100 New Cutting Kray Plugins 7.08 Upd

1

| Step | Action | Plugin | Expected Time Savings | |------|--------|--------|-----------------------| | | Import scanned sketch (300 dpi) | Kray‑Edge | 1 min vs. 6 min manual tracing | | 2 | Clean up stray points, set line weight | Kray‑Edge | 2 min (auto‑clean) | | 3 | Assign material profile (e.g., 0.13 mm vinyl) | Kray‑Slice | – | | 4 | Nest with other pending jobs | Kray‑Slice | 30 % less material waste | | 5 | Review 3‑D fold simulation | Kray‑Vista | 5 min vs. 20 min physical mock‑up | | 6 | Export final .prc and cut‑order CSV | Kray‑Slice | Instant | | 7 | Load into cutter software (e.g., Graphtec CE7000) | Pro100 core | One‑click “Send to Device” | Pro100 New Cutting Kray Plugins 7.08

A

| Test | Material | Size | Paths | Nesting Time (old) | Nesting Time (7.08) | Waste % (old) | Waste % (7.08) | |------|----------|------|-------|-------------------|---------------------|---------------|----------------| | | Vinyl | 4 × 6 ft | 120 | 4 min | 2 min | 9 % | 3 % | | B | Cardboard | 2 × 3 ft | 85 | 2 min | 1 min | 12 % | 5 % | | C | Fabric | 5 × 5 ft | 200 | 7 min | 4 min | 15 % | 7 % | Pro100 v7

• Verify kerf settings with a calibration cut on the actual material.
• Confirm tab strength and placement for part handling.
• Simulate entire cut sequence and spot-check estimated times.
• Test exported files on the target controller or run a dry-run without cutting material.

: While the software and plugins represent an investment, the time saved by the New Cutting 1 | Step | Action | Plugin |

The Kray Plugins 7.08 are designed to enhance the cutting capabilities of Pro100 software. The plugins offer a range of features, including: