Pci-e Nic Driver Windows 10 [exclusive] - Realtek Rtl8188ce Wireless Lan 802.11n

The Complete Guide to the Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Driver on Windows 10

Four driver variants were tested. Only one produced stable n-mode operation.

This specific network interface card (NIC) is a single-chip 802.11n solution. It uses the PCI Express interface and supports speeds up to 150Mbps. Because it is an older "Legacy" device, Windows 10 does not always include the most optimized driver in its base installation, which can lead to frequent disconnects or limited signal strength. How to Download the Driver The Complete Guide to the Realtek RTL8188CE Wireless LAN 802

wmic nic get name, description

Code 31 (device not working): Uninstall the device in Device Manager, check "Delete driver software," then reboot and reinstall.
Code 43: Indicates hardware failure or severe driver conflict. Try booting into Safe Mode with Networking. If Wi-Fi works there, a third-party software (VPN, firewall, or virtual adapter) is causing conflict.
Code 52 (unsigned driver): Re-enable test signing mode or use the official signed driver from Realtek.

Open regedit and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\4d36e972-e325-11ce-bfc1-08002be10318\[Your Adapter Subkey] Code 31 (device not working): Uninstall the device

Install manually

Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Go to product viewer dialog for this item. Driver for Windows 10 Finding the correct driver for the Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Go to product viewer dialog for this item. check "Delete driver software

Let me pick from a list of available drivers on my computer

Click , then click Have Disk and browse to the extracted folder. Troubleshooting Compatibility