Washer Instructions New Link | Rok Power

1. Pre-Operation Assembly

To operate a new ROK power washer safely and effectively, you must follow a specific sequence of assembly, priming, and maintenance. ROK pressure washers are typically electric units designed for domestic use, requiring a steady water supply and proper electrical grounding to function correctly.

• Main unit
• High-pressure hose
• Spray gun + lance
• Adjustable nozzle (often 5-in-1 or turbo)
• Water inlet connector (hose adapter)
• Detergent bottle (if included)
• Manual + warranty card

1. Connect water supply – turn tap ON fully.
2. Squeeze trigger gun (without nozzle attached) until steady water stream flows – releases trapped air.
3. Attach nozzle (start with 40° for general cleaning).
4. Plug into mains (RCD-protected socket recommended).
5. Turn switch to “ON” / “I”.
6. Squeeze trigger – washer will start after 1–3 seconds.

Review: ROK Power Washer Instructions & Setup Experience

Turbo/Soap:

Use the turbo nozzle for stubborn dirt on concrete and the soap nozzle for applying detergents. 4. Starting the Machine rok power washer instructions new

1. The "Quick Start" Guide vs. The Full Manual

🛑 4. Shutdown & Storage (New Unit Care)