Sanyo Mac 1200 Autoclave Manual New! «CONFIRMED · CHECKLIST»
-liter capacities (depending on the specific MLS-series variant). sterilizers.com Operational Instructions Preparation
The Sanyo MAC 1200 features a distinctive analog/digital hybrid panel. The manual explains: sanyo mac 1200 autoclave manual
Practical tips to extend service life
The MAC-1200 is optimized for efficiency in high-turnover clinical environments. Sterilization Temperatures: Supports dual modes at 121 raised to the composed with power C (approx. 20 minutes) and 135 raised to the composed with power C (approx. 4 minutes). Drying Time: Adjustable range from 0 to 90 minutes. Construction: Qualified Personnel : Only trained and authorized personnel
Daily
| Frequency | Task | Manual Section | | :--- | :--- | :--- | | | Drain chamber water; wipe door gasket with soft cloth. | 6.1 | | Weekly | Clean the air jet (needle valve) using the provided cleaning wire. | 6.2 | | Monthly | Run a empty “Bowie-Dick” type test cycle (though specific to MAC 1200, a standard steam test). | 6.3 | | Quarterly | Calibrate pressure gauge against a certified reference. | 7.0 (Service only) | | Annually | Replace door gasket (part # MAC-1200-19) and safety valve inspection. | 8.0 | Appendix A: Troubleshooting Guide 5
- Qualified Personnel: Only trained and authorized personnel should operate and maintain the autoclave.
- Electrical Safety: Ensure the autoclave is installed on a dedicated 120V, 20A circuit and that the power cord is not damaged.
- Pressure Vessel: The autoclave is a pressure vessel and requires careful handling to avoid injury or damage.
- Chemical Hazards: Handle chemicals and biological agents with care, and follow proper disposal procedures.
Appendix A: Troubleshooting Guide
5. Common Error Codes / Troubleshooting (from manual)
Note: For the exact Sanyo/Panasonic model number, it is recommended to search for the specific model's operation manual on the Panasonic Healthcare (now PHCbi) website or on industrial documentation sites.