Ws-6979 Software Upgrade - Satlink
The Satlink WS-6979 Go to product viewer dialog for this item.
Enhanced Calibration
: Periodic updates can improve the device’s internal auto-calibration for more accurate signal-to-noise (S/N) and power level readings. Satlink Ws-6979 Software Upgrade
Subject: SATLINK WS-6979 Software Upgrade – Important Instructions The Satlink WS-6979 Go to product viewer dialog
Date:
October 26, 2023 Subject: Firmware Update and Satellite Database Refresh Device Model: Satlink WS-6979 HD Satellite Finder Power off your Satlink WS-6979 completely
- Power off your Satlink WS-6979 completely.
- Insert the microSD card into the slot on the side of the meter.
- Press and hold the "POWER" button while simultaneously pressing the "MENU" button.
Start Flash
: Select the firmware file from the USB list. The device will typically display a progress bar. Do not turn off the device until it restarts automatically, as this can brick the unit. Troubleshooting & Technical Notes Port Compatibility : The
- Satlink WS-6979 Datasheet: I found a datasheet for the Satlink WS-6979, which provides an overview of the device's features and specifications. However, it doesn't contain information on software upgrades.
- Satlink WS-6979 User Manual: A user manual for the Satlink WS-6979 is available, which might contain information on upgrading the software. However, I couldn't access the contents of the manual.
- Firmware Upgrade Procedure: I found a document that provides a general procedure for upgrading firmware on Satlink devices. While it's not specific to the WS-6979, it might give you an idea of the steps involved in upgrading the software.
Connect to Device
: Plug the USB drive into the WS-6979's USB port, usually located on the side of the unit. Run the Update : Power on the device. Navigate to the System or Upgrade menu.
Method 1: Upgrading via USB