Sc569-00 Ricoh Work

SC569-00

The error on a Ricoh device is a Service Call (SC) code specifically indicating a Fusing Pressure Release Motor Error . This fault occurs when the machine fails to detect the Home Position (HP) of the pressure roller release mechanism after three consecutive attempts. Common Causes of SC569-00

Technical Write-Up: Ricoh SC-569-00

• Unplug finisher from MFP.
• At sensor: check +5V, GND, signal line. Manual operation should toggle signal.
• At motor: check winding resistance (typically 15–50 ohms per coil). Infinite → dead motor.

Permanent Prevention Strategies

Step 1: Perform a Hard Reset

Step 3: Test the Fuser Lamp

If you own any of these devices and see the red “Service Call” prompt with SC569-00, do not reset the main breaker repeatedly—this can damage the power supply unit. sc569-00 ricoh