Manual — Simrad Rf300 Installation

Simrad RF300 Go to product viewer dialog for this item. is a medium-duty rudder feedback unit designed to provide precise rudder angle data to your autopilot system through a frequency-modulated signal. 1. Physical Mounting

Ensure the VHF radio is powered OFF.
Screw the PL-259 connector onto the radio’s ANT terminal.
Hand-tighten, then secure with 1/8 turn using a wrench – do not overtighten.
For extra moisture protection, wrap the connection with self-amalgamating tape.

The RF300 comes with a transmission link (that adjustable metal rod). You’ll want to: Attach one end to the RF300's arm. Attach the other to the rudder arm/quadrant. The Golden Rule: simrad rf300 installation manual

7. Maintenance

To the "Rudder" input on your Autopilot Computer (like an AC10, AC20, or AC42). To the common/ground return. Simrad RF300 Go to product viewer dialog for this item

2. Product Overview

The antenna unit should be mounted on a sturdy structure that can support its weight and withstand environmental conditions.
The manual specifies a minimum distance from other antennas to prevent interference.