Siruba L818fm1 Error List Work Now

Siruba L818FM1 is an industrial lockstitch sewing machine primarily designed for light-to-medium weight fabrics. Because it is a mechanical machine, it does not typically display digital error codes like "E-01" or "E-07" unless it is paired with an external electronic servo motor (e.g., Ho Hsing or ISM).

  • Symptom: Machine cuts the thread but leaves long tails; or knife moves but doesn't cut.
  • Fix:

    When you contact a technician or supplier, include: siruba l818fm1 error list work

    Siruba L818FM1

    This guide provides a comprehensive breakdown of the error codes, their causes, and troubleshooting steps for the sewing machine. Siruba L818FM1 is an industrial lockstitch sewing machine

    1. Stop Operation: Take your foot off the pedal.
    2. Power Cycle: Turn the main power switch OFF. Wait for 5 seconds. Turn it back ON.
    3. Reset Needle: If the needle is stuck in the down position, turn the handwheel manually (if the motor allows) or check for jams before restarting.
    • Cause: The main shaft hall sensor (synchronizer) is not sending data to the control box. Dirty encoder disc, loose connector, or failed sensor.
    • Work / Solution:
Go to Top