Sp Flash Tool Stuck At |top| Download Da 100 Direct

Getting stuck at "Download DA 100%" (the red bar) typically means SP Flash Tool

Hardware Connection

: A faulty USB cable, loose port, or insufficient power from the PC's USB port can halt the process. sp flash tool stuck at download da 100

1. Check USB cable & port

If drivers are fine, the tool's internal configuration might be the issue: Getting stuck at "Download DA 100%" (the red

• Why this works: "Firmware Upgrade" sends a different command sequence to the DA, bypassing certain authentication checks. If you are stuck at 100%, this often kicks the process to 100% complete instantly.

Downgrade for Older Devices

: Conversely, if you are flashing a very old device, try using an older version like v3.13. Check USB cable & port

Bypass Protections

: For some newer Mediatek chipsets, you may need to use a Bypass Utility first to disable protection before the tool can successfully detect the device beyond the 100% DA stage. Stuck at Download DA 100% - Hovatek

or a DA file specifically provided with your device's firmware. Fix Driver Issues: Ensure you have the MTK VCOM USB Drivers Preloader Drivers installed, not just standard ADB drivers. If the device isn't being recognized, try right-clicking flash_tool.exe , going to Properties > Compatibility , and setting it to Windows XP Service Pack 3 , then run it as Administrator Check Hardware Connection:

: Modern MediaTek devices (like Xiaomi, Oppo, or Realme) often have security locks that prevent flashing. Using an MTK Bypass Utility