Ts1162 Installation Manual Exclusive
TS1162
The refers to a specific manual identifier for the Santa Fe Advance100 Dehumidifier
- Connect earth ground to the dedicated grounding terminal.
- Ensure bonding to the building ground system per local code.
- For installations near high EMI sources, use dedicated grounding conductors and minimize loops.
: Ensure all power is turned off to the Challenger panel before beginning any wiring. Additional Inputs includes a specific input for Request to Exit (RTE) ts1162 installation manual exclusive
- Power off the unit for 30 seconds.
- Press and hold the Mode + Enter buttons simultaneously.
- Apply power while still holding. Wait for the display to flash
FAC. - Release buttons. Immediately enter the code: 1162-00-99 (using the increment buttons).
Securing:
Tighten the mounting bolts to the specific torque rating mentioned in the technical specs (usually around 15-20 Nm for this model). Do not over-tighten, as this can crack the housing. 3. Wiring and Electrical Integration TS1162 The refers to a specific manual identifier
Required Tools:
You will typically need a metric socket set, a torque wrench, a multimeter for electrical testing, and high-grade silicone sealant (if applicable). Connect earth ground to the dedicated grounding terminal
For more information on the TS1162 device, including detailed technical specifications, please refer to the manufacturer's website or documentation.