V2000-c User Manual [verified] «ULTIMATE»

V2000-C

The is a standalone RFID Access Control System designed for single-door security. It supports multiple entry modes, including card only, password only, or a combination of both. Core Specifications

9. Technical Specifications

Yellow

Use the wire to connect an exit button for interior egress. 3. Initial Programming Setup To enter programming mode, you must use the Master Code . Default Master Code: 999999 v2000-c user manual

• Manual solution: Check the coaxial cable latch. Press firmly until you hear a click. Then go to Menu > Display > Rear Cam > On.

Green:

NC (Normally Closed) – Used for standard electric locks. V2000-C The is a standalone RFID Access Control

The V2000-C has the following technical specifications: Manual solution: Check the coaxial cable latch

• [List technical specifications, such as dimensions, weight, processor, memory, etc.]
• [Mention any certifications or compliance with industry standards]

• On camera: Press Play mode → browse files → locked videos are in a separate folder.
• On computer: Connect via USB → select “Mass Storage” → open DCIM folder.