Vijeo Designer 62 Tutorial | Original

Vijeo Designer

To get started, follow these standard steps in the interface: Project Wizard : Open the software and select "New Project."

The Story: The "Silent" Conveyor Belt

1. Connect the HMI to your PC via Ethernet or USB.
2. In the Project Browser, double-click Target → Communication.
3. Set the IP Address or USB settings according to your HMI model.
4. Click Download (or press Ctrl + F5).
5. Follow the download wizard. Ensure the HMI is in Transfer mode (usually reboot while holding the screen).

: Add a "New Equipment" entry under the driver and enter the IP address of your PLC. 3. Variable (Tag) Management vijeo designer 62 tutorial

Tutorial: A Blinking "Emergency" Indicator

Vijeo Designer 6.2 Tutorial: Your First HMI Project

If you are using EcoStruxure Machine Expert, you can often export your variable list and import it directly into Vijeo Designer to save time. 4. Designing the User Interface This is where you build the "look and feel." Graphics Sidebar: Drag and drop objects like Data Displays onto the canvas. Animations: Vijeo Designer To get started, follow these standard

: During setup, you can add drivers to communicate with other hardware, such as Siemens PLCs. IP Configuration Connect the HMI to your PC via Ethernet or USB

1. On your main screen, drag the Alarm Viewer component.
2. Stretch it to the bottom 150 pixels.
3. In properties, set Display Mode to "Active + History."