Xmtd-2201: Manual

PT100 RTD

Go to product viewer dialog for this item. is a digital display temperature controller designed for high-precision management in industrial and commercial applications. It features a compact 72x72mm panel size and supports various input signals, including and K or E type thermocouples . Core Technical Specifications Key performance metrics and electrical requirements for the Power Supply: Standard AC 220V/380V (±10%), 50/60Hz.

1. Isolation: Ensure power is disconnected before wiring.
2. Current Limits: Do not exceed the relay amperage rating. If your heater draws more than 5 Amps, you must use an external contactor or SSR.
3. Sensor Matching: Always verify that the controller is programmed for the correct sensor type (e.g., K-type thermocouple). Using a J-type sensor on a K-type setting will result in incorrect temperature readings.

Time Proportional

: Provides more stable control than standard switching by cycling the output. Wiring and Installation

Operating Your xmtd-2201 Device

• Cause: The heating element has high thermal inertia, or the P setting is too wide.
• Solution: Adjust the P value to a lower number (increase sensitivity) or adjust the D value higher to anticipate the heat rise.

The XMTD-2201 is a state-of-the-art device designed to provide efficient and reliable performance in various applications. This manual serves as a comprehensive guide for users, providing detailed information on the device's features, installation, operation, maintenance, and troubleshooting.