The indicator light on the flickered a defiant, electric green, pulsing like the heartbeat of the entire facility. Down in the sub-basement of the Arctic Research Station, Elias clutched the grease-stained manual as if it were a holy relic.
Moves the cursor to select specific digits for faster adjustment. Up/Down Keys: xta-7000 temperature controller manual
But PID requires values: P, I, and D. The numbers were currently set to defaults that didn't match the heavy thermal mass of the extruder. XTA-7000 The indicator light on the flickered a
You can enable or disable setting changes by holding the "Hidden Protection Function Key" for 3 seconds. Toolots, Inc. Resources for Manuals Inc. Resources for Manuals
AL1=1 (Absolute high). Set AL1 value to 250°C. If PV reaches 251°C, the AL1 relay trips. Wire this relay to cut power to the heater contactor.AL1=2 (Absolute low). Set value to -10°C.AL1=3. Set AL1 value to 10. This triggers if the PV deviates more than ±10°C from the SV.